1. INTRODUCTION
1.8
Silent Mode
The silent mode, which requires a password to activate, deactivates the audio alarms
from the ECDIS. Use this mode when the ECDIS is not required, like in a harbor.
To go to the silent mode, first click the [OTHERS] button on the Status bar then click
[SILENT]. Have the holder of the password enter the password then click the [OK] but-
ton.
To return to normal operation, click [Back to Normal Mode].
1-6
SILENT
Playback
Enter password;
click OK button.
Click to return to normal operation.
Click OTHERS,
SILENT.