Furuno FMD-3100 Operator's Manual page 75
Electronic chart display and information system, ecdis
Hide thumbs
Also See for FMD-3100:
- Operator's manual (362 pages) ,
- Installation manual (110 pages) ,
- Instruction manual (103 pages)
Table of Contents
Advertisement
3. Click the [OK] button to install the charts. The [Install chart data] window appears
and shows the percentage of completion, with digital and analog indications.
To show details during the installation, click the [Show detail] button.
To close the [Message] window, click the [Hide detail] button.
4. When the installation is
completed, information
about the installation ap-
pears in the [Error/Warn-
ing/Guidance] window.
Click the [Confirm] button
to finish.
5. If applicable, set the next
sequential medium and
repeat steps 2-4 to install
the next charts.
6. After all necessary charts
are installed, reset the
power.
Note 1: When many charts are installed, the ECDIS checks for error in the installed
chart data at the next power up. This is not an indication of malfunction.
Note 2: Previous versions of charts cannot be displayed if installed after installing the
latest versions.
3. HOW TO MANAGE CHARTS
3-5
Advertisement
Table of Contents
Troubleshooting
