How To View Linked User Chart Information - Furuno FMD-3100 Operator's Manual

3 Check ETA win-
dow
WPT, Distance
Plan
Actual
To Localtime
Off Plan
SPD Calcula-
tion
Suggested SPD The system calculates suggested speed so that ETA to the WPT selected
Start Calculate
4 Total WPTs
Total Distance
11.5

How to View Linked User Chart Information

Click the [Voyage] and [Monitor INFO] buttons on the InstantAccess bar™, then click
the [Linked User Chart] tab in the [Monitor Information] dialog box.
The [Linked User Chart] list shows all the user charts linked with the monitored route
and their contents. Click a user chart name to show the contents of the chart in the
[Contents] window. Items with a checkmark are activated. For the [Check ETA] win-
dow, see the preceding page.
Parameters for checking ETA. The arrow to the left of [Check ETA] col-
lapse or display the [Waypoints] and [Linked User Chart] tabs.
Select a WPT to find the distance to that waypoint from current position.
When planned speed is used in navigation, ETA to selected waypoint ap-
pears.
When using current speed in navigation, ETA to selected waypoint is
shown.
Switch between UTC and local time for ETA. For local time, the settings
used in the creation of the route are used for the ETA calculation. See
section 9.4.1.
The time difference between planned ETA and calculated ETA to final
WPT, when different. The indication is prefixed with "-" if earlier than
planned; "+" if later than planned.
Enter ETA (time and date) to find the speed to use to arrive by the ETA.
would be same as planned ETA if type of optimization was "Time table".
Click to start calculation. The button label changes to [Stop Calculate].
The total number of waypoints in the route.
The total distance of the route.
11. HOW TO MONITOR ROUTES
11-5