ABB SPAC 536 C User Manual page 67

Data
Direct output control
Open select
(secured operation)
Close select
(secured operation)
Execute selected open/close
operation
Cancel selected open/close
operation
Open pulse length
Close pulse length
Execute selected open/close
operation (common addr. 900)
Cancel selected open/close
operation (common addr. 900)
kWh value per pulse
Position of switch SG1/2
Position of switch SG1/1
Object indication mode
Display indication mode
Scaling of current measurement
Scaling of voltage measurement
Low limit for mA signal of
active power
High limit for mA signal of
active power
Low limit for mA signal of
react. power
High limit for mA signal of
react. power
Active power corresponding
to mA signal at low limit
Active power corresponding
to mA signal at high limit
Reactive power corresponding
to mA signal at low limit
Reactive power corresponding
to mA signal at high limit
Channel Code Data
direction
1...7 O1 W
1...7 V1 RW
1...7 V2 RW
1...7 V3 W
1...7 V4 W
1...7 V5 RW(e) 0.1...100.0 s
1...7 V6 RW(e) 0.1...100.0 s
0 V251 W
0 V252 W
0 S3 RW(e) 0.01...1000 kWh per pulse
0 S5 R
0 S6 R
0 S7 RW(e) 0=continuous display
0 S8 RW(e) 0=continuous display
0 S9 RW(e) 0.00...10000.00 (opt. 1, 2 or 3)
0 S10 RW(e) 0.00...10000.00 (opt. 1, 2 or 3)
0 S12 RW(e) -20...+20 mA (opt. 1)
0 S13 RW(e) -20...+20 mA (opt. 1)
0 S14 RW(e) -20...+20 mA (opt. 1)
0 S15 RW(e) -20...+20 mA (opt. 1)
0 S16 RW(e) -999.99...+999.99 MW (opt. 1)
0 S17 RW(e) -999.99...+999.99 MW (opt. 1)
0 S18 RW(e) -999.99...+999.99 Mvar (opt. 1)
0 S19 RW(e) -999.99...+999.99 Mvar (opt. 1)
Values
0=open
1=close
0=open
1=closed
0=open
1=closed
1=execute selected operation
1=cancel selected operation
1=execute all selected operations
1=cancel all selected operations
0=AR in use (SG1/2=0)
1=AR out of use (SG1/2=1)
0=operation position ( SG1/1=0)
1=interlockings off (SG1/1=1)
1=automatic switch off
after 10 min.
1=automatic switch off
after 5 min.
35