ABB SPAC 536 C User Manual page 63

The event masks V155...V157 of channel 0
may have a value within the range 0...1023 and
the event mask V158 of channel 0 within the
range 0...2047.
The event mask V155 of channels 8...17 may
have a value within the range 0...15 and the
event mask of channels 1...7 within the range
0...2047. The default values are shown in the
next table.
Channels 1...17 have a setting S20, which ena-
bles or inhibits the event reporting of the con-
cerned channel. The default value is 0, which
means that event reporting is allowed according
to the event mask.
Channel Code Event
0 E1 Key switch in position LOCAL
0 E2 Key switch in position REMOTE
0 E3 Output test switch (SG1/1) ON
0 E4 Output test switch (SG1/1) OFF
0 E5 Auto-reclosing ON
0 E6 Auto-reclosing OFF
0 E7 Auto-reclose interrupted
0 E8 AR interrupted by open command
0 E9 AR interrupted by ARINH input
(external, variable S79)
0 E10 Close or open command by AR failed
0 E11 AR cycle 1 in progress
0 E12 CB closed by AR cycle 1
0 E13 Cycle 1 initiated by signal AR1 in progress
0 E14 Cycle 1 initiated by signal AR2 in progress
0 E15 Cycle 1 initiated by signal AR3 in progress
0 E16 Cycle 2 in progress
0 E17 CB closed by AR cycle 2
0 E18 Cycle 2 initiated by signal AR1 in progress
0 E19 Cycle 2 initiated by signal AR2 in progress
0 E20 Cycle 2 initiated by signal AR3 in progress
The settings S10...S13 for channels 1...7 and
the settings S10 and S11 for channels 8...17
define the event delays. The event delays are
used to filter out unwanted events when status
data is changing. An event code is generated
only if the status data is stable for a longer time
than the corresponding event delay, e.g. the
event code E4 "change in status: xx -> 00" can be
filtered out, when the status of an object is
changing from open to close or vice versa. The
time marking of a delayed event is the actual
event time plus the delay time. The capacity of
the event register is 100 events.
The control module has the following event
codes:
Number
representing
the event
1
2
4
8
16
32
64
128
256
512
1
2
4
8
16
32
64
128
256
512
Default value
of the event
factor
1
1
0
0
0
0
1
0
0
0
V155 = 67
1
1
0
0
0
1
1
0
0
0
V156 = 99
31