Changing The Configuration; Installation Of The Configuration Software - ABB FMT200-ECO2 Operating Instruction

Thermal mass flowmeter

Hide thumbs Also See for FMT200-ECO2:

Table of Contents

6 Changing the configuration

Changing the configuration means setting the parameters of the instrument, i.e. output signals and mea-

suring ranges. The configuration software is using the standard serial interface RS 232 of the PC and the

FTM200-ECO2 (Sensyflow eco 2). The service and configuration box (Order.Nr.:7962818) is a simple

tool for connecting FTM200-ECO2, PC and power supply.

System requirements

The configuration software is using Microsoft Windows 3.1 or higher and Windows 95/NT.

The Software will be supplied on three 3 ½" disks or on CD ROM. To install the software, start Microsoft

Windows 3.1 or higher. Insert the disk labeled: " ECO2 KONFIGURATION ... DISK 1/3"or the CD-ROM

and start the program SETUP.EXE. We are sorry that our installation routine is not in English. All instal-

lation screens will be displayed in German, but the configuration program itself is also available in English

and French.

If you see this message, please close all other programs:

Fig. 6-1

Other wise you will see this message:

Fig. 6-2

Verzeichnis = Directory

Setup beenden (Exit Setup) Click here to exit the installation

Click on the computer symbol to continue the installation.

Thermal Mass Flowmeter FMT200-ECO2

Click on the button „Verzeichnis wechseln" to change the installation

Sensyflow eco2