Table of Contents
Advertisement
Congratulations!
By purchasing this Mass Flow Meter FMT200-ECO2 (Sensyflow eco2), you have acquired a device which
satisfies the highest quality and performance standards. FMT200-ECO2 (Sensyflow eco2) is the result of
our long experience; it has been conceived in direct response to customer requirements.The modular set-
up and the many adaptation possibilities guarantee utmost ease of operation and great versatility.Our cal-
ibration systems in Alzenau (DKD Test Center No: 05701) and our competence in the fields of gas and
flow engineering guarantee for unfailing quality and fast service.
1 Important information in advance
1.1 Symbols
To ensure optimum use of these operating instructions and a safe use of the assemblies during commis-
sioning, operation and maintenance, please observe the following explanations regarding the symbols
used.
Explanations of symbols used.
Apart from the information in these operating instruction you must also observe commonly valid safety
and accident prevention directives.
If the information contained in these operating instructions is not sufficient for an application our service
organisation will gladly be at your disposal for further information.
Please read these assembly and operating instructions carefully prior to installation.
1.2 In case of questions
If you cannot find any information concerning technical questions or malfunctions in these operating in-
struction, please apply to one of our external service points or contact our technical user assistance hot-
line directly. For all questions concerning the measuring system, please have the calibration certificate
readily at hand.
42/14-41 EN
Thermal Mass Flowmeter FMT200-ECO2
Warning
STOP
Caution
!
Notice
!
Important
Sensyflow Hotline
Important information in advance
Indicates a risk or potentially hazardous situation which, if not avoided,
could result in death or serious injury.
Indicates a potentially hazardous situation or alerts against unsafe prac-
tices which, if not avoided, may result in injury of persons or property
damage.
Indicates a potentially harmful situation which, if not avoided, may result
in damage of the product itself or of adjacent objects.
Indicates useful hints or other special information which, if not observed,
could lead to a decline in operating convenience or affect the
functionality.
Example: "Ready-made C-routines are available on the support disk."
Tel:
+49 6023 92-3597 oder -3267
Fax:
+49 6023 92-3210
E-mail:
sensyflow.deapr@de.abb.com
5
Advertisement
Table of Contents
