Installation And Start-Up; Checking The Preconditons; Selecting The Installation Site; Dimensions And Mounting - ABB FMT200-ECO2 Operating Instruction

Thermal mass flowmeter

Hide thumbs Also See for FMT200-ECO2:

Table of Contents

4 Installation and start-up

Accompanying every measuring system is a calibration certificate, containing all the important informa-

tion (e.g. serial number, calibrated measuring range, order number, adjusted outputs at time of delivery).

Please ascertain if this data corresponds to the requirements of the measuring point in question.

• For ambient temperatures see section on "Technical Features".

• The mounting position is arbitrary.

• To prevent negative effects on measurement accuracy, sufficient straight upstream length is required

• Use straight, smooth pipes with lengths of approx. 10 × D for the steadying lengths on the input side. If

• Components affecting flow, such as valves or shut-off fittings should be possibly installed behind the

Should there be any uncertainty or questions regarding the measuring point to be selected, please con-

tact the ABB Service Team in Alzenau.

Tel:

Fax:

E-mail:

42/14-41 EN

Thermal Mass Flowmeter FMT200-ECO2

when small flange connectors DN 25, Transair, G 3/4" and G 1" are used. These entry lengths ensure

elimination of flow profile irregularies before they reach the measuring point at the sensor.

using the G 1/2" and G 3/8" adapters, no extra steadying lengths will be required, as flow stabilizing

components have been installed on the inflow sides of the adapters. The flow straightener causes an

increased pressure drop.

measuring point.

+49 6023/92-3267 or +49 6023/92-3597

+49 6023/92-3210

sensyflow.deapr@de.abb.com

Installation and start-up

170

Table of Contents

Sensyflow eco2