Switch Output; No Output; Program Error Messages - ABB FMT200-ECO2 Operating Instruction

6.5.4
In this mode the FMT200-ECO2 (Sensyflow eco2) will observe whether the actual measuring value is be-
tween the adjusted limits. The polarity informs the eco2, how the signal should react.
Fig. 6-20
6.5.5
This mode disables the digital output.

6.6 Program error messages

Message
Illegal function call
22 Thermal Mass Flowmeter FMT200-ECO2

Switch output

No output

Problem
This message might occur, if the
FMT200-ECO2 (Sensyflow eco2)
was already connected as you start-
ed up your Windows NT System.
Changing the configuration
Solution
Exit the FMT200-ECO2 (Sensy-
flow eco2) program and discon-
nect the power supply of the
eco2. Restart the device and the
program.
42/14-41 EN