Notes Regarding Operation In Hazardous Areas - ABB FMT200-ECO2 Operating Instruction

Application according to designation, general safety instructions
Duties of the operator:
– maintain the system in proper condition
– continuously monitor the system
– execute required maintenance and repair work immediately
– carry out required safety measures
If the devices are used in areas where dusts can cause explosion hazards, you must clean the devices
frequently.
Use genuine spare parts, only.
2.2.2

Notes regarding operation in hazardous areas

The device is available in a Zone 2 / Zone 22 certified version. Each of these units is shipped together
with a EC declaration of conformity (ATEX) . For the operation of Zone2 / Zone 22 certified devices only
the values written down in this declaration of conformity (ATEX) are relevant.
Warning
! Operating the device in Zone 1/ 21 or Zone 0 / 20 is not permitted.
STOP
42/14-41 EN Thermal Mass Flowmeter FMT200-ECO2 7