Identifier
Status
Replacing the touchpad
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.
Identifier
Status
Procedure
1
Angle and slide the touchpad into the slots on the palm-rest and keyboard
assembly.
2
Replace the four screws (M2x2) that secure the touchpad to the palm-rest and
keyboard assembly.
3
Reconnect the touchpad cable to the system board and close the latch to secure
it.
4
Adhere the adhesive tape that secures the touchpad to the system board.
Identifier
Status
Post-requisites
1
Replace the battery.
2
Replace the
base
GUID-B55423C5-03BB-46A2-9B5F-B8F3B4C854AB
Released
computer. After working inside your computer, follow
After working inside your
GUID-BA365D1F-EA09-4C8C-821A-08EEE807DF19
Released
GUID-957FD87B-A0FD-42EE-ABEB-DA6D9BD2F27A
Released
cover.
computer. For more safety best
www.dell.com/
Before
47