Identifier
Status
Replacing the display cable
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.
Identifier
Status
Procedure
1
Route the display cable through the routing guides on the display back-cover and
antenna assembly.
2
Adhere the adhesive tape that secures the camera cable to the display back-
cover and antenna assembly.
3
Slide the camera cable into the connector on the camera module to secure the
cable.
Identifier
Status
Post-requisites
1
Replace the
display
2
Replace the
display
3
Replace the
display
4
Replace the
display
5
Replace the
wireless
6
Replace the
base
GUID-57172914-AB24-4DCE-BD70-0967C1E82776
Released
computer. After working inside your computer, follow
After working inside your
GUID-1DBE37FD-ED9D-4564-881F-78B68B7D59F8
Released
GUID-FF739F72-C0D5-4E9E-9A60-A7034AC40D5F
Released
hinges.
panel.
bezel.
assembly.
card.
cover.
computer. For more safety best
www.dell.com/
Before
103