Identifier
Status
Replacing the fan
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.
Identifier
Status
Procedure
1
Align the screw holes on the fan with the screw holes on the system board.
2
Replace the two screws (M2x5) securing the fan to the system board.
3
Connect the fan cable to the system board.
Identifier
Status
Post-requisites
Replace the
base
40
GUID-2596AFC0-F1E8-4A0E-A603-7D2CFE582ECE
Released
computer. After working inside your computer, follow
After working inside your
GUID-48D41CD6-79CC-4D5F-8DA1-1FB6A63A6D69
Released
GUID-174AF13A-4525-4DF6-A83C-B8131643436A
Released
cover.
computer. For more safety best
www.dell.com/
Before