Replacing The Touchpad; Procedure; Post-Requisites - Dell Inspiron 13-7375 Service Manual

Replacing the touchpad

WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.

Procedure

1 Place the touchpad on the palm-rest assembly.
2 Align the screw holes on the touchpad with the screw holes on the palm-rest
assembly.
3 Replace the screws that secure the touchpad to the palm-rest assembly.
4 Adhere the pieces of tape that secure the touchpad to the palm-rest assembly.
5 Slide the touch-pad cable into the respective connector on the system board and
close the latch to secure the cable.

Post-requisites

1 Replace the status-light
2 Replace the battery.
3 Replace the base
60
computer. After working inside your computer, follow
After working inside your
board.
cover.
computer. For more safety best
www.dell.com/
Before