Identifier
Status
Removing the power button with
fingerprint reader
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.
NOTE: Applicable only for computers that are shipped with fingerprint
reader.
Identifier
Status
Prerequisites
1
Remove the
base
2
Remove the
solid-state
3
Remove the
wireless
4
Remove the
I/O
Identifier
Status
Procedure
1
Remove the screw (M2x3) that secures the power button with fingerprint reader
to the palm-rest and keyboard assembly.
2
Using a plastic scribe, release the fingerprint-reader board from the guides on
the palm-rest and keyboard assembly.
GUID-43423BFB-7BAA-4C7E-BA7A-12118E225EBA
Released
computer. After working inside your computer, follow
After working inside your
GUID-CF260A94-1E93-43CB-AC32-36CFA1C664A6
Released
cover.
drive.
card.
board.
GUID-11BA495C-6BF1-48C4-AECE-8174D6EDDFEC
Released
computer. For more safety best
www.dell.com/
Before
75