Post-Requisites; Entering The Service Tag In The Bios Setup Program - Dell Inspiron 13 5000 Service Manual

6 Slide the touchpad cable into its respective connector on the system board and
close the latch.
7 Connect the speaker cable from the system board.
8 Align the screw holes of the USB Type C bracket with the screw holes on the
system board and palm-rest and keyboard assembly.
9 Replace the two screws (M2x5) that secure the USB Type C port bracket to the
system board.
10 Connect the power-adapter port cable to the system board.
11 Connect the display cable to the system board.
Identifier
Status

Post-requisites

1 Replace the memory
2 Replace the heat
3 Replace the fan.
4 Replace the solid-state
5 Replace the battery.
6 Replace the base
Identifier
Status
Entering the Service Tag in the BIOS setup
program
1 Turn on or restart your computer.
2 Press F2 when the Dell logo is displayed to enter the BIOS setup program.
3 Navigate to the Main tab and enter the Service Tag in the Service Tag Input
field.
NOTE: Service tag is the alphanumeric identifier located at the back side of
your computer.
GUID-5CBD1806-EF57-4769-9E26-75062C502E20
Released
module.
sink.
drive.
cover.
GUID-C264FC4F-B5CD-4F08-9183-CB9FC26A5E6A
Released
83