Removing The Display Assembly; Prerequisites; Procedure - Dell Inspiron 13 5000 Service Manual

Identifier
Status

Removing the display assembly

WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.
Identifier
Status

Prerequisites

1 Remove the base
2 Remove the wireless
Identifier
Status

Procedure

1 Remove the four screws (M2.5x4) that secure the left and right hinges to the
system board and I/O board.
2 Note the routing of the antenna cables and remove the cables from the routing
guides on the fan.
GUID-AB1F153B-621B-42FC-89BE-0E1105FF1786
Released
computer. After working inside your computer, follow
After working inside your
GUID-B4299300-D1DA-4BD6-A6CF-AAEC73498A2D
Released
cover.
card.
GUID-A215D1F0-2496-4D5D-9060-D3A5347D2B1F
Released
computer. For more safety best
www.dell.com/
Before
59