Table of Contents
Advertisement
NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in
Before working inside your
working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Procedure
1. Align the screw holes on the touch pad with the screw holes on the palm rest and keyboard assembly.
2. Replace the screws that secure the touch pad to the palm rest and keyboard assembly.
3. Align the screw holes on the touch-pad bracket with the screw holes on the palm rest and keyboard assembly.
4. Replace the screws that secure the touch-pad bracket to the palm rest and keyboard assembly.
5. Adhere the tape that secures the touch-pad bracket to the palm rest and keyboard assembly.
6. Adhere the touch-pad cable to the touch pad.
7. Slide both ends of the touch-pad cable into their respective connectors and close the latches to secure the cable.
8. Slide both ends of the keyboard cable into their respective connectors and close the latches to secure the cable.
Post-requisites
1. Replace the
status-light
2. Replace the battery.
3. Replace the
base
cover.
computer. After working inside your computer, follow the instructions in
board.
Replacing the touchpad
20
After
www.dell.com/
Replacing the touchpad
39
Advertisement
Table of Contents
