Table of Contents
Advertisement
NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in
Before working inside your
working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Topics:
•
Procedure
•
Post-requisites
Procedure
1. Align the screw holes on the touch pad with the screw holes on the palm-rest assembly.
2. Replace the four screws (M2x2) that secure the touchpad to the palm-rest assembly.
3. Adhere the tapes that secure the touchpad to the keyboard shield.
4. Slide the touchpad cable into the connector on the system board and close the latch to secure the cable.
Post-requisites
1. Replace the battery.
2. Replace the
base
cover.
Replacing the touchpad
computer. After working inside your computer, follow the instructions in
34
After
www.dell.com/
Replacing the touchpad
53
Advertisement
Table of Contents
