Identifier
Status
Replacing the base cover
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.
Identifier
Status
Procedure
1
Connect the battery cable to the system board, if applicable.
CAUTION: To avoid accidental damage to the power-adapter port, do
not press the base cover against the power-adapter port when you
snap the base cover to the computer base.
2
Place the base cover on the palm-rest and keyboard assembly, and snap the
base cover into place starting from the power-adapter port.
3
Replace the seven screws (M2.5x4) that secure the base cover to the palm-rest
and keyboard assembly.
4
Tighten the three captive screws that secure the base cover to the palm-rest
and keyboard assembly.
20
GUID-27446428-82D7-4881-9220-9EB090B046EA
Released
computer. After working inside your computer, follow
After working inside your
GUID-B47BF7C4-C9B0-4896-A150-6B45442A712F
Released
computer. For more safety best
www.dell.com/
Before