Identifier
Status
Replacing the wireless card
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.
Identifier
Status
Procedure
CAUTION: To avoid damage to the wireless card, do not place any cables
under it.
1
Connect the antenna cables to the wireless card.
The following table provides the antenna-cable color scheme for the wireless
card supported by your computer.
Table 2. Antenna-cable color scheme
Connectors on the wireless card
Main (white triangle)
Auxiliary (black triangle)
2
Align the notch on the wireless card with the tab on the wireless-card slot and
insert the wireless card at an angle into the wireless-card slot.
3
Place the wireless card bracket on the wireless card.
GUID-94E88AEC-6F12-4B0E-AA6A-B28D8E200225
Released
computer. After working inside your computer, follow
After working inside your
GUID-94792422-279C-4098-B635-D4C4E04CF63D
Released
computer. For more safety best
Antenna-cable color
White
Black
Before
www.dell.com/
33