Installation - Electrolux EKC6450AOX User Manual

Hide thumbs Also See for EKC6450AOX:
Table of Contents

Advertisement

28
www.electrolux.com
Problem
You cannot activate the
outer ring.
The oven does not heat
up.
The oven does not heat
up.
The oven does not heat
up.
The lamp does not oper‐
ate.
The display shows "12.00". There was a power cut.
Steam and condensation
settle on the food and in
the cavity of the oven.
12.2 Service data
If you cannot find a solution to the
problem yourself, contact your dealer or
an Authorised Service Centre.
The necessary data for the service
centre is on the rating plate. The rating
We recommend that you write the data here:
Model (MOD.)
Product number (PNC)
Serial number (S.N.)

13. INSTALLATION

WARNING!
Refer to Safety chapters.
13.1 Technical data
Dimensions
Height
Width
Depth
Possible cause
The oven is deactivated.
The clock is not set.
The necessary settings are
not set.
The lamp is defective.
You left the dish in the
oven for too long.
847 - 867 mm
596 mm
600 mm
Remedy
Activate the inner ring first.
Activate the oven.
Set the clock.
Make sure that the settings
are correct.
Replace the lamp.
Reset the clock.
Do not leave the dishes in
the oven for longer than 15
- 20 minutes after the
cooking process ends.
plate is on the front frame of the
appliance cavity. Do not remove the
rating plate from the appliance cavity.
.........................................
.........................................
.........................................
13.2 Location of the appliance
You can install your freestanding
appliance with cabinets on one or two
sides and in the corner.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ekc6450aow

Table of Contents