Troubleshooting - Electrolux EKC6450AOX User Manual

Hide thumbs Also See for EKC6450AOX:
Table of Contents

Advertisement

The back lamp
The lamp glass cover is at
the back of the cavity.
1. Turn the lamp glass cover
counterclockwise to remove it.
2. Clean the glass cover.
3. Replace the oven lamp with a
suitable 300 °C heat-resistant oven
lamp.
Use the same oven lamp type.
4. Install the glass cover.
11.7 Removing the drawer
WARNING!
When the oven is in use,
heat can build up in the
drawer. Do not keep
flammable things in there
(e.g. cleaning materials,
plastic bags, oven gloves,
paper, cleaning sprays, etc.).
The drawer below the oven can be
removed for cleaning.

12. TROUBLESHOOTING

WARNING!
Refer to Safety chapters.
12.1 What to do if...
Problem
You cannot activate the
appliance.
You cannot activate the
appliance.
Residual heat indicator
does not come on.
1. Pull the drawer out until it stops.
2. Lift the drawer at a small angle and
Inserting the drawer:
1. To insert the drawer set the drawer
2. Lower the drawer until it is horizontal
Possible cause
The appliance is not con‐
nected to an electrical sup‐
ply or it is connected incor‐
rectly.
The fuse is released.
The zone is not hot be‐
cause it operated only for a
short time.
1
remove it from the drawer support
rails.
on the support rails. Make sure that
the catches engage correctly into the
rails
and push it in.
Remedy
Check if the appliance is
correctly connected to the
electrical supply.
Make sure that the fuse is
the cause of the malfunc‐
tion. If the fuse releases
again and again, contact a
qualified electrician.
If the zone operated suffi‐
ciently long to be hot,
speak to an Authorised
Service Centre.
ENGLISH
27
2

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ekc6450aow

Table of Contents