Installation And Assembly - Electrolux 720008 Manual

1.6 Installation and assembly

Introduction
Machine installation and assembly operations must only be carried out by
` `
specialised personnel provided with all the appropriate personal protection
equipment, tools, utensils and ancillary means, with adequate enclosure
of the assembly area to keep out unauthorised persons.
The operations described must be carried out in compliance with the cur-
` `
rent safety regulations.
Disconnect the appliance from the power supply before carrying out any
` `
installation and assembly procedure.
Electrical connection
Grounding instructions:
The wine cellar must be grounded in case of an electrical short circuit.
Grounding reduces the risk of electrical shock. The wine cellar is equipped
with a power cord having a grounding wire and plug. The wine cellar plug
must be plugged into a properly affixed and grounded electrical outlet.
Note: in locations where there is frequent lightning, it is advisable to use surge
protectors.
Improper use of the grounding plug can result in the risk of electric shock.
Consult a qualified electrician or service person if the grounding instructions
are not completely understood.
If the supply cord is damaged, it must be replaced by a qualified person in
order to avoid electrical hazard.
Work on the electrical systems must only be carried out by a qualified
` `
electrician.
Connection to the power supply must be carried out in compliance with
` `
the regulations and provisions in force in the country of use.
The information regarding the appliance power supply voltage is given
` `
on the dataplate.
13