Setting Up Bis User; Further Settings; Definition Of Custom Fields - Bosch BIS 2.3 Installation Manual

BIS 2.3 - Access Engine
4.5

Setting up BIS user

During the system installation, the users Administrator and BIS
are created. Both users automatically receive full privileges for
the BIS platform, the Access Engine dialogs and the server
workstation.
NOTICE!
i
The functionality of the preinstalled profiles is explained in
Section 6.4.1 User with Administrator profile, Page 60.
4.6

Further Settings

In the BIS Configuration Browser Menu Infrastructure you will
find a number of Access Engine applications for the special
access control settings.
4.6.1

Definition of Custom fields

Up to ten extra text fields (Custom fields) can be defined to
appear on the various tabs of the Persons dialog.
The following points should be noted:
Each field can appear on only one tab.
Each field can appear on any tab.
All fields can appear together on any tab.
All fields can be moved to a different tabs, by changing the tab
assignment in the "Display in section" column of the Custom
fields screen.
The field label can be freely defined.
The field label can be up to 20 characters long.
The fields themselves can contain any text.
The field text can be up to 40 characters long.
All fields can be defined as obligatory (required input).
Custom fields are displayed in the same order as defined. If a
field definition is skipped then no gap is left in the persons
dialog. However if that field is later defined it will be displayed
at its original position and hence push the fields after it back by
one position.
Bosch Sicherheitssysteme GmbH Installation manual
System configuration | en
F.01U.028.713 | V 2.3.0.1 | 2009.11
31