122 en | Setting up Video Verification
NOTICE!
i
Only one LiveImageUrl URL may be active (uncommented) at
one time. Please make sure that the other is commented out or
deleted.
2.
F.01U.028.713 | V 2.3.0.1 | 2009.11
–
Depending on the type of camera you wish to use,
uncomment the appropriate line by removing the
slashes // at the beginning of it, and change the IP-
Address in the file to that of the camera you wish to
use.
–
Save and close the file.
Start the BIS Configuration Browser and click the menu
Connections.
–
Select the entry reader for the relevant entrance in
the device explorer.
–
Select the tab Door Control and check the box
labeled Host Verification.
Installation manual
BIS 2.3 - Access Engine
Bosch Sicherheitssysteme GmbH