Dms - Data Management System; System Operation; Starting - Bosch BIS 2.3 Installation Manual

78 en | DMS - Data Management System
10

DMS - Data Management System

10.1

System operation

10.1.1

Starting

The master process is set up and installed as an XP/W2000
service and is controlled by the operating system's Service
Control Manager (SCM). It appears in the list of services.
Figure 10.1 Windows XP services dialog
This provides independence with respect to the users currently
logged on - the DMS starts or continues to run even without
user logon or during a user changeover.
If for some reason the service is not started, it will start as soon
as the Dialog Manager is called up via the BIS System Manager.
Process description file
In order to start the whole system on the server only the master
process need be started. The information that is required to
start all processes correctly is read from the process
description file while the master is initializing. This process
description file is a UCI command file that holds process
characteristics in the form of UCI (Universal Command
Interpreter) commands and parameters
The command file is divided into blocks. Each block stands for a
special core system process. Each block begins with the
command 'define', followed by the position parameter 'name',
which contains the process name. The process characteristics
are specified by the command 'set' plus a named parameter.
F.01U.028.713 | V 2.3.0.1 | 2009.11 Installation manual
BIS 2.3 - Access Engine
Bosch Sicherheitssysteme GmbH