42
en | Setting up additional workstations
5.2.2
Hardware
Before they can be used for creating ID cards, cameras and
badge printers need to be installed with their respective drivers
as provided by the manufacturers. After thus installing and
connecting the devices they should be configured using the
Card Personalization dialog.
Invoke ACE Configuration Card Personalization from the tools
menu of the Configuration Browser. Cameras are configured
on the Video tab and badge printers on the Print tab.
5.2.3
Creating Badge Layouts
Badge layouts can only be created using the corresponding
Configuration Browser application on the server. This is
available at all workstations where the Access Engine dialog
Print Badges is enabled.
1.
2.
NOTICE!
You can create any number of layouts in order to distinguish
i
between, for example, employees and visitors and their
respective access rights. For help with layout and formating
please consult the application's own online help.
F.01U.028.713 | V 2.3.0.1 | 2009.11
Start the Configuration Browser as described in
Section 4.1 Starting the Configuration Browser, Page 24
Switch to the Tools menu and invoke the application dialog
ACE Badge Designer
–
To start the application itself click button Badge
Designer
–
The button New invokes a menu with predefined card
layouts. Choose the layout which fits your
requirements and click OK.
–
Create the new card layout in accordance with your
company standards.
–
Save the layouts you have created under descriptive
names which will mean something to those eventually
responsible for creating badges.
–
In order for the layouts to become accessible to other
workstations they will need to be published (File >
Installation manual
BIS 2.3 - Access Engine
Bosch Sicherheitssysteme GmbH