Acsp - Process For Access Control - Bosch BIS 2.3 Installation Manual

BIS 2.3 - Access Engine
10.2.3

ACSP - process for access control

The various functional areas are connected to the DMS as self-
sufficient subsystems via interface processes.
The interface processes comprise various interfaces:
–
–
–
The status of the subsystem is also monitored via this interface.
Functions
The actual access control system is controlled by the MAC
(Main Access Controller). It receives all necessary data from the
DMS from a dedicated interface process.
Bosch Sicherheitssysteme GmbH
The DMS interface to the loggifier, via which data changes
are recognized (which then cause data change orders on
the subsystem) and events reported by the subsystem are
entered into the event logs.
A client interface via which control orders from the DMS to
the subsystem can be transmitted.
The interface to the subsystem via which both control and
data change orders to the subsystems and also status and
event messages from the subsystem are exchanged.
Installation manual
DMS - Data Management System | en
F.01U.028.713 | V 2.3.0.1 | 2009.11
93