Ogstor Instruction - Mitsubishi MELSEC-L series Programming Manual

5.1.3

OGSTOR instruction

G(P)_OGSTOR
Structured ladder
G_OGSTOR
EN ENO
Un* d
s
Input argument EN:
Executing condition
Un*: Start I/O number of the module
(00 to FE: Higher two digits when expressing the I/O number in
three digits)
s: Variable that stores control data
Output argument ENO: Execution result
d:
Variable that turns ON upon completion of the instruction
d[1] also turns ON at the time of error completion.
Setting
data
Function
This instruction restores the user range settings offset/gain values stored in the programmable
controller CPU to the analog modules.
ST
ENO:= (EN, Un*, s, d);
G_OGSTOR
Internal device
R, ZR
*1
Bit Word
−
s
d
*1: Local devices and file registers per program cannot be used as setting data.
P: Executing condition
indicates any of the following
instructions.
G_OGSTOR
GP_OGSTOR
:Bit
:ANY16
:Array of ANY16 [0..99]
:Bit
:Array of bit [0..1]
J \
U \G
Bit Word
−
−
5.1 Analog Instruction
5.1.3 OGSTOR instruction
G_OGSTOR
G_OGSTOR
:
5
Zn Constant Others
5-31