Prr Instruction - Mitsubishi MELSEC-L series Programming Manual

5.2.9

PRR instruction

G(P)_PRR
Structured ladder
G_PRR
EN ENO
Un* d
s
Input argument EN: Executing condition
Un*: Start I/O number of the module
(00 to FE: Higher two digits when expressing the I/O number in
three digits)
s: Variable that stores control data
Output argument ENO:
Execution result
d: Variable that turns ON upon completion of the instruction
d[1] also turns ON at the time of error completion.
Setting
data
Function
This instruction sends data by user frame according to the specification in user frame
specification area for transmission during communication using the nonprocedural protocol.
ST
ENO:= (EN, Un*, s, d);
G_PRR
Internal device
R, ZR
*1
Bit Word
−
s
d
*1: Local devices and file registers per program cannot be used as setting data.
5.2 Serial Communication and Modem Interface Instruction
P: Executing condition
indicates any of the following
instructions.
G_PRR
GP_PRR
:Bit
:ANY16
:Array of ANY16 [0..4]
:Bit
:Array of bit [0..1]
J \
U \G
Bit Word
−
−
5.2.9 PRR instruction
G_PRR
G_PRR
Sirial Modem
:
5
Zn Constant Others
5-81