Vector Servos Installation - Freewing FJ3021 User Manual

Vector Servos Installation

&
Note:
Before installing a servo, use a servo tester or radio to
center the servos. Install the servo arm and test its position to
ensure it is centered.
1.Apply the glue to the indicated positions as the
arrows show.
2. Attach the servos to the fuselage.
3.Use the pushrods to connect servo arm and
vector control horn.
4.After installation, use glue to attach the
protective cover to the fuselage.
r';:: ,
Vector pushrod length (Vertically)
========= = = = ===========::
m m
8 6
(3.4 in)
r>r:::= ,
Vector pushrod length (Horizontally)
===9 2 m= m ===-
(3.62 in)
F/A 18E Super Hornet
Item No.: FJ3021
Version No.: FJ3021-V02
=,
Pushrod diameter: 0 1.2mm
,
Pushrod diameter : 0 1.2mm
,
-4-
Installing hole of Vector pushrod (Vertically)
Installing hole of Vector push rod (Horizontally)
EN