Nose Cone Installation
Since a magnet is used to secure the nose cone, all you
need to do is to put it in place.
Air-Brake Installation
D
D
A-
Air-brake set
D-Pushrod
B-16g Servo
E-Servo cover
C-Servo hard point.
1. Use a servo tester or radio to center the
servo.
move forward toward the nose
F-104S Starfighter
Item No.:FJ310
A
Step
1
Step
3
2.Use glue to attach the speed brake set (A) to both sides of the fuselage.
3.Use glue to attach servo(B) to the servo mount(C).
When installing, please note:
4.Ensure the servo and fuselage extension cables are properly attached and secure.
5.Insert the pushrod into the bolt of servo arm.
4.Keep the air brakes in the closed position, and tighten the screw of the bolt.
5.Test the system to make sure it is operating properly. Use glue to attach the servo
box cover in order to protect servo.
Ai
pushrod size
r brake
Pushrod diameter: Ø1.5mm
50mm
(1.97in)
Ai
pushrod m
r brake
ounting hole
Rotating the pushrod,will increase
or reduce it's length.
C
B
E
EN
EN
Step
2
Step
4
6
R