Angled-Style Fittings - JLG 10msp Service And Maintenance Manual

Angled-Style Fittings

Step 1. Prior to disconnection, ensure that sys-
tem is not under pressure.
Step 2. Pull on hose assembly to create a gap
between the dust boot and hose fitting
shoulder.
Step 3. Insert the disconnect tool in the gap cre-
ated between the dust boot and hose fit-
ting shoulder.
3121228
Step 4. Gently push hose assembly into cou-
pling body (see directional arrow).
Step 5. While maintaining slight pressure on
hose assembly, actuate tool (see arrow).
Step 6. Pull on hose assembly to complete dis-
connection.
– JLG Lift –
SECTION 5 - MAST COMPONENTS
5-15