Connecting The Soundpoint Ip Color Expansion Module - Polycom SOUNDPOINT IP 670 User Manual

Connecting the SoundPoint IP Color Expansion Module

This section describes how to attach the SoundPoint IP Color Expansion
Module to your phone. You can attach up to three SoundPoint IP Color
Expansion Modules.
To connect a SoundPoint IP Color Expansion Module to your phone:
1. Remove the rubber plug from the SoundPoint IP 670 phone or the
SoundPoint IP Color Expansion Module.
ABC DEF
1 2 3
GHI JKL MNO
4 5 6
2. Align the SoundPoint IP Color Expansion Module at the top of the groove
lines on the SoundPoint IP 670 phone and slide it downwards until it
clicks into position.
s
ns
ABC DEF
1 2 3
e
GHI JKL MNO
4 5 6
3. Connect the base stand by aligning the two protrusions on the stand to
the holes on the back of the Color Expansion Module and snap it into
place.
For each SoundPoint IP Color Expansion Module that you want to add, repeat
steps 1 to 3.
Using the SoundPoint IP Color Expansion Module
Menu
Messages
Do Not Disturb
Menu
Messages
Do Not Disturb
5 - 3