Polycom SOUNDPOINT IP 670 User Manual page 80

User Guide for the SoundPoint IP 670 Desktop Phone
Note
Note
4 - 4
To send a text message:
1. Do one of the following:
— Press
Select Instant Messages.
Screen options may vary with your application. Text messaging may be accessible
with a single key press. Contact your system administrator about this option.
— Press
Select Features > Messages > Instant Messages.
2. (Optional.) If multiple lines are configured on your phone, use
to select the line to retrieve messages from.
3. Press the New soft key.
4. Enter the number.
Use the 1/A/a soft key to alternate between numeric and upper/lower case
alphanumeric modes.
You can also enter the SIP URL or IP address. For more information on using a SIP
URL or IP address, refer to the instructions for using the handset in
page 3-2.
5. Press the Ok soft key.
6. Do one of the following:
— To choose from various pre-scripted short messages, press the Select
soft key.
— To compose a custom message, press the Edit soft key.
Use dial pad keys to cycle through the character set. Use keys 1, *, 0,
and # to select special characters.
7. Press the Send soft key.
8. Press
.
.
to return to the idle display.
and
Placing Calls on