Polycom SOUNDPOINT IP 670 User Manual page 55

• Multiple Line Keys per line
If your phone is configured with multiple call appearances, refer to
Multiple Call Appearances
call.
You can ignore incoming calls by pressing the Reject soft key (for private lines) or
Note
the Silence soft key (for shared lines) or the Do Not Disturb key. The Do Not
Disturb mode stays active when the call ends and remains active until you press the
Do Not Disturb key again.
You can forward incoming calls by pressing the Forward soft key. For more
information, refer to
When your phone is configured with a silent ring, press the ringing Line key or the
Answer soft key to answer the call. If your handset is off-hook, the call is routed to
the handset. If your handset is on-hook, the call is routed to the speaker.
Answering When Not in Another Call
In all cases, the active call will appear on the graphic display showing call
duration and destination.
To answer a call using the handset:
Pick up the handset.
>>
To answer a call using Hands-Free Speakerphone mode:
Note If "Handsfree mode disabled" appears on the graphic display after you press the
speakerphone key
your phone.
Do one of the following:
>>
— Press
— With the handset on-hook, press
flashing green status indicator).
on page 4-1 for instructions on how to answer a
Dynamic Forwarding on page 3-21.
,
your system administrator has disabled the speakerphone on
.
Using the Basic Features of Your Phone
Using
(next to the
3 - 5