Stratasys Objet1000 Plus User Manual page 163

Objet1000 Plus User Guide
10. When the "Preparation for Pattern Test" screen appears, tape a sheet of
11. Close the printer doors and click Next in the wizard screen.
12. When the Pattern Test is printed, carefully inspect it, using the Missing
DOC-06810 Rev. B
pink paper to the surface left of the build tray, as shown below.
Figure 6-56 Pattern Test paper positioned next to the build tray
Nozzles Ruler to see if there are missing lines.
Figure 6-57 Inspecting the Pattern Test
Each missing line represents a faulty nozzle in the print head.
6 Operating and Maintaining the Objet1000 Plus 3D Printer
6-43