Default Settings - Stratasys Objet1000 Plus User Manual

Objet1000 Plus User Guide
Default You can control the default settings of several Objet Studio features from the
Settings Advanced tab of the Options dialog box.
To display the Options dialog box
➢ From the Tools menu, select Options.
By default, when Objet Studio places objects on the build tray, it orients them
Automatic
optimally, for the shortest printing time. If necessary, you can choose to
Orientation
cancel automatic orientation each time you place an object on the build tray
(see "Automatic Orientation" on page 5-27). In any case, when objects are on
the build tray, you can change their orientation manually (see "Manual
Positioning" on page 5-29.)
To change the default setting so that Automatic Orientation is disabled:
➢ In the Advanced section of the Options dialog box, clear the check box.
Automatic Zoom When Auto Zoom is selected in the Advanced section of the Options dialog
box, the display zooms in, to display the objects placed on the build tray. This
allows you to carefully inspect and manipulate the objects.
By default, this feature is not enabled. In any case, you can change the zoom
level, as necessary (see "Zoom Options" on page 5-49).
DOC-06810 Rev. B
or—
In the Objet Studio Commands menu
Figure 5-92 Options dialog box, Advanced tab
5 Using Objet Studio
, click Options.
5-70