GE F60 Instruction Manual page 114
Ur series.
feeder protection system
Hide thumbs
Also See for F60:
- Instruction manual (724 pages) ,
- Communications manual (532 pages) ,
- Communications manual (526 pages)
Table of Contents
Advertisement
4.1 ENERVISTA UR SETUP SOFTWARE INTERFACE
The FlexLogic entries are also shown as locked in the graphical view (as shown below) and on the front panel display.
4
b) LOCKING FLEXLOGIC EQUATIONS TO A SERIAL NUMBER
A settings file and associated FlexLogic equations can also be locked to a specific UR serial number. Once the desired
FlexLogic entries in a settings file have been secured, use the following procedure to lock the settings file to a specific serial
number.
1.
Select the settings file in the offline window.
2.
Right-click on the file and select the Edit Settings File Properties item.
The following window is displayed.
3.
Enter the serial number of the F60 device to lock to the settings file in the Serial # Lock field.
The settings file and corresponding secure FlexLogic equations are now locked to the F60 device specified by the serial
number.
4-10
Figure 4–9: SECURED FLEXLOGIC IN GRAPHICAL VIEW
Figure 4–10: TYPICAL SETTINGS FILE PROPERTIES WINDOW
F60 Feeder Protection System
4 HUMAN INTERFACES
GE Multilin
Advertisement
Table of Contents
