GE F60 Instruction Manual page 116

4.1 ENERVISTA UR SETUP SOFTWARE INTERFACE
This information is also available in printed settings file reports as shown in the example below.
4
b) ONLINE DEVICE TRACEABILITY INFORMATION
The F60 serial number and file transfer date are available for an online device through the actual values. Select the Actual
Values > Product Info > Model Information menu item within the EnerVista UR Setup online window as shown in the
example below.
This information is also available from the front panel display through the following actual values:

ACTUAL VALUES

ACTUAL VALUES
c) ADDITIONAL TRACEABILITY RULES
The following additional rules apply for the traceability feature
• If the user changes any settings within the settings file in the offline window, then the traceability information is
removed from the settings file.
• If the user creates a new settings file, then no traceability information is included in the settings file.
• If the user converts an existing settings file to another revision, then any existing traceability information is removed
from the settings file.
• If the user duplicates an existing settings file, then any traceability information is transferred to the duplicate settings
file.
4-12
Figure 4–13: SETTINGS FILE REPORT SHOWING TRACEABILITY DATA
Figure 4–14: TRACEABILITY DATA IN ACTUAL VALUES WINDOW

PRODUCT INFO MODEL INFORMATION

PRODUCT INFO MODEL INFORMATION
F60 Feeder Protection System
Traceability data
in settings report

SERIAL NUMBER

LAST SETTING CHANGE
4 HUMAN INTERFACES
842862A1.CDR
GE Multilin