Table of Contents
Advertisement
im Vertrieb von
3
Overview
The RC-2C/RC-2 is a 1 Gang 2-button controller
OUT port (for the RC-2C only) and two backlit and label capable buttons. It
sends an RS-232 command—with the push of a button—to a device (such as a
projector, display or switcher) via serial control protocols.
Each button can be assigned with a trigger containing up to four actions for
RC-2 and up to eight actions for RC-2C.
To achieve the best performance avoid interference from neighboring electrical
appliances and position your Kramer RC-2C/RC-2 away from moisture,
excessive sunlight and dust.
1 Available as a 1 Gang wall plate for the USA or a 1 Gang wall plate for Europe (in two sizes: 8.6cm and 8cm)
www.camboard.de
2
CAMBOARD Electronics
Overview
Tel. 07131 911201
Fax 07131 911203
1
with an RS-232 port, an IR
ce-info@camboard.de
KRAMER: SIMPLE CREATIVE TECHNOLOGY
Advertisement
Table of Contents
Need help?
Do you have a question about the RC-2C and is the answer not in the manual?
Questions and answers