GRAUPNER 33575 Manual page 13

FREE MIXER < >
>MIXER:
FROM CHANNEL:
>TO CHANNEL:
>TRIM: +0%
TRV - : +100%
TRV + : +60%
Programming examples
Programming examples
33576_jp_V1
Delta with aileron differential (1 aileron)
FREE MIXER
>MIXER:
1
FROM CHANNEL:
2
>TO CHANNEL:
3
>TRIM:
TRV - :
TRV + :
In this example aileron differential is set to 40%. Alternatively you
may prefer to carry out the programming using the transmitter
menu. A 'Aileron -> elevator' mixer can be set up at the trans-
mitter instead of 'Free mixer 3' at the receiver; the mixer should
be set up asymmetrically, e.g. +30%, -30%. This option frees
up one mixer at the receiver.
Two elevator servos
(channel 6 for the second elevator servo)
FREE MIXER
>MIXER:
FROM CHANNEL:
>TO CHANNEL:
>TRIM:
TRV - :
TRV + :
Only for transmitters without a butterfly (crow) mixer:
If a butterfly (crow) mixer is required, you will not be able to use
one of the two functions 'differential' or 'landing flap' adjust-
ment, as 2 mixers are needed for this.
FREE MIXER
>MIXER:
FROM CHANNEL:
>TO CHANNEL:
>TRIM:
TRV - :
TRV + :
FREE MIXER
>MIXER:
FROM CHANNEL:
>TO CHANNEL:
>TRIM:
TRV - :
TRV + :
< > FREE MIXER
2 >MIXER:
3 FROM CHANNEL:
2 >TO CHANNEL:
+0% >TRIM:
-100% TRV - :
-100% TRV + :
< >
1
3
6
+0%
+100%
+100%
< > FREE MIXER
1 >MIXER:
1 FROM CHANNEL:
2 >TO CHANNEL:
+0% >TRIM:
+100% TRV - :
+100% TRV + :
< > FREE MIXER
1 >MIXER:
1 FROM CHANNEL:
2 >TO CHANNEL:
+0% >TRIM:
+100% TRV - :
+100% TRV + :
< >
3
2
2
+0%
+60%
+100%
< >
2
1
5
+0%
-100%
-100%
< >
2
1
3
+0%
-100%
-100%
13 / 24