Subaru IMPREZA 2004 Service Manual page 69

FUEL INJECTION (FUEL SYSTEMS)
(2) Hold the connector (A), and then push the
retainer (B) down.
(3) Pull out the connector (A) from retainer (B).
( A )
(A) Connector
(B) Retainer
(C) Pipe
B: INSTALLATION
1) Connect the quick connector on fuel delivery
line.
NOTE:
• Replace the retainer with a new one.
• Make sure that the connected portion is not dam-
aged or has dust. If necessary, clean the seal sur-
face of pipe.
(A) Seal surface
(B) Pipe
(1) Set the new retainer (B) to connector (A).
(2) Push the pipe into connector completely.
Fuel Delivery, Return and Evaporation Lines
( B )
( C )
FU-00124
( A )
( B )
FU-00125
FU(H4SO)-64
NOTE:
At this time, two clicking sounds are heard.
( A )
(A) Connector
(B) Retainer
(C) Pipe
CAUTION:
• Pull the connector to ensure it is connected
securely.
• Ensure the two retainer pawls are engaged in
their mating positions in connector.
• Be sure to inspect the hoses and their con-
nections for any leakage of fuel.
(A) Connector
(B) Retainer
(C) Pipe
2) Connect the fuel delivery hose to pipe with an
overlap of 20 to 25 mm (0.79 to 0.98 in).
Type A: When the fitting length is specified.
Type B: When the fitting length is not specified.
( B )
( C )
FU-00126
FU-00127