Subaru IMPREZA 2004 Service Manual page 128

(4) Engine harness connectors
(5) Generator connector, terminal and A/C
compressor connector
( B )
( A )
(A) Generator connector and terminal
(B) A/C compressor connector
(6) Accelerator cable (A) and cruise control ca-
ble (B) (Model with cruise control)
(A)
(7) Power steering switch connector
Engine Assembly
FU-00826
ME-00208
(B)
FU-00251
FU-00878
ME(H4SO)-35
13) Disconnect the following hoses.
(1) Brake booster vacuum hose
(2) Heater inlet outlet hose
14) Remove the power steering pump from brack-
et.
(1) Remove the resonator chamber.
(2) Loosen the lock bolt and slider bolt, and
then remove the front side V-belt. <Ref. to
ME(H4SO)-43, FRONT SIDE BELT, REMOV-
AL, V-belt.>
(3) Remove the pipe with bracket.
MECHANICAL
FU-00879
ME-00330
FU-00877