Subaru IMPREZA 2004 Service Manual page 597

FUEL INJECTION (FUEL SYSTEMS)
24) Remove the bolt which installs the fuel pipes on
intake manifold.
25) Remove the fuel pipe assembly (B) and pres-
sure regulator (A) from intake manifold.
( B )
D: ASSEMBLY
1) Install the fuel pipe assembly (B) and pressure
regulator (A), etc. to intake manifold.
( B )
Intake Manifold
2) Tighten the bolt which installs the fuel pipes on
intake manifold.
Tightening torque:
6.4 N·m (0.65 kgf-m, 4.7 ft-lb)
FU-00929
3) Connect the fuel injector pipe RH to fuel hose,
( A )
and tighten the clamp screws.
FU-00930
4) Install the fuel injector pipe.
( A )
FU-00930
5) Connect the fuel injector pipe LH to fuel hose,
and then tighten the clamp screw.
FU(H4SOw/oOBD)-24
FU-00929
FU-00279
FU-00928
FU-00927