Subaru IMPREZA 2004 Service Manual page 639

9) Separate the quick connector on fuel delivery
line.
(1) Clean the pipe and connector, if they are
covered with dust.
(2) Hold the connector (A) and push retainer (B)
down.
(3) Pull out the connector (A) from retainer (B).
NOTE:
Replace the retainer with a new one.
( A )
(A) Connector
(B) Retainer
(C) Pipe
B: INSTALLATION
1) Connect the quick connector on fuel delivery
line.
NOTE:
• Always use a new retainer.
• Make sure the connected portion is not damaged
or not covered with dust. If necessary, clean the
seal surface of pipe.
(A) Seal surface
(B) Pipe
Fuel Delivery, Return and Evaporation Lines
( B )
( C )
FU-00124
( A )
( B )
FU-00125
FU(H4SOw/oOBD)-63
FUEL INJECTION (FUEL SYSTEMS)
(1) Set the new retainer (B) to connector (A).
(2) Push the pipe into connector completely.
NOTE:
At this time, two clicking sounds are heard.
( A )
(A) Connector
(B) Retainer
(C) Pipe
CAUTION:
• Pull the connector to ensure it is connected
securely.
• Ensure the two retainer pawls are engaged in
their mating positions in connector.
• Be sure to inspect the hoses and their con-
nections for any leakage of fuel.
(A) Connector
(B) Retainer
(C) Pipe
( B )
( C )
FU-00126
FU-00127