EXHAUST
• 2.0 L
8) Tighten the bolt which holds the front and center
exhaust pipe assembly to hanger bracket.
Tightening torque:
35 N·m (3.6 kgf-m, 26.0 ft-lb)
9) Lower the vehicle.
10) Connect the rear oxygen sensor connector.
11) Connect the front oxygen (A/F) sensor connec-
tor.
Front Exhaust Pipe
12) Connect the battery ground cable to battery.
EX-00031
C: INSPECTION
1) Make sure there are no exhaust leaks from con-
nections and welds.
2) Make sure there are no holes or rusting.
EX-00038
EX-00030
EX-00029
EX(H4SO)-8
FU-00009