Subaru IMPREZA 2004 Service Manual page 228

COOLING
14) Remove the radiator upper brackets.
15) Detach the power steering hose from clip on ra-
diator.
16) Lift the radiator up and away from the vehicle.
B: INSTALLATION
1) Attach the radiator lower cushions to holes on
the radiator lower bracket.
2) Install the radiator to vehicle.
NOTE:
Fit the pins on lower side of radiator into the cush-
ions on the body side.
3) Install the radiator upper brackets, and then
tighten the bolts.
Radiator
Tightening torque:
18 N·m (1.8 kgf-m, 13.0 ft-lb)
CO-00090
4) Attach the power steering hose to radiator.
CO-00037
5) Connect the radiator inlet hose.
6) Install the air intake duct. (2.5 L model)
7) Install the reservoir tank.
CO-00041
8) Connect the overflow hose.
9) Lift-up the vehicle.
10) Connect the ATF cooler hoses. (AT model)
CO(H4SO)-20
CO-00090
CO-00037
CO-00089
CO-00034