Ptz Setting - Panasonic WV-V6430L Operating Instructions Manual

Parameter
PTZ direction
Speed
Quick Position
Zoom/focus/iris
3.2

PTZ Setting

PTZ setting interface is shown as in Figure 3-3.
Here you can set scan, preset, tour, pattern, assistant, go to and pan function.
Parameter
Scan
Preset
Tour
Pattern
Note
PTZ supports eight directions: left/right/up/down/upper left/upper right/bottom
left/bottom right.
Note:
When the camera attains its tilt end point with manual operations, the pan
automatically rotates the camera so that it does not stop at its tilt end point and
enables operations to be continued.
It controls rotation speed. The longer the step length, the higher the speed.
Step length control PTZ, zoom, focus and iris.
Use mouse to draw a box in monitoring video, PTZ will rotate and focus to
quickly positioning.
Click to increase value and click
Note:
Some cameras don't support iris, please refer to the actual devices for details.
Function
 Select Scan from the dropdown list, click Start button, you can begin scan
operation. Default Scan No. is 1.
Input the preset value and then click View button, the camera turns to the

corresponding position of the preset.
 Select Tour from the dropdown list and then click Start button, you can
begin tour.
 You can select Pattern from the dropdown list and then click Start button to
begin PTZ movement.
Figure 3-3
to decrease value.
12